LVL beam (Laminated veneer lumber): Sizes, Cost, span and price | LVL sizes and span | LVL size calculator and price | LVL beam | LVL beam sizes | LVL beam span | LVL beam cost | LVL beam calculator | 24 feet LVL beam price | 20 feet LVL beam price | 24 feet LVL beam price | 30 feet LVL beam price | What is Laminated veneer lumber or LVL beam.

Laminated veneer lumber or LVL is a high-strength structural engineered wood product of modern innovation and one of the most widely used throughout kinds of timber or lumber in construction projects industry. It is much look like recent plywood, typically made of thin sheets of wood products which are sandwiched to each other and bound with super stronger glue.

Laminated veneer lumber or LVL typically used for boards of all kinds members, it is used for window and door headers, trusses, edge, beam rim boards, skateboards, as well as beams, and edge forming materials and many more. It is available in US, a wide range of lengths, widths and thicknesses and customize as per requirements.

As per “The American wood Council National design specification for wood”, An LVL is type of structural composite engineered wood lumber comparable to glued laminated timber known as Glulam. It is product of modern recent innovation they are result of new science, technology and economic pressure to make use of new many wood species and smaller trees that cannot be used to make solid Lumber. Today, its full fill demand of construction industry.

**What is an LVL beam?**

LVL beam is a Laminated veneer lumber, typically made of thin sheets of wood products which are sandwiched to each other and bound with super stronger glue. It is a enough strong wood and straight that fights against warping and shrinking, providing great stability for your projects.

An LVL beam is used to eliminate twisting and splitting for quiet floors. For the wood’s dimensional stability, inspection times are often reduced, too. An LVL has a “maximum allowable bending stress” range between 2,800 or 3,000 PSi. Its offer several advantages over technical milled timber or lumber, which are made in factory under control specification and engineering guidelines, it is more stronger straighter and more uniform in size.

**What are LVL beam sizes**

LVL beam (Laminated veneer lumber) sizes may vary as per manufacturer, but an LVL standard thickness (depth) are 1-3/4 inches to 3-1/2 inches thick and length of an LVL are generally available in 24′, 28′, 32′, 36′, 40′ and 44 feet with special order upto 60 Feet long. Depth of an LVL beam are typically range from 5 1/2 inches to 24 inches. It is available in depth of 7-1/4 inches , 9-1/4 inches , 9-1/2 inches, 11-1/4 inches, 11-7/8 inches, 14 inches, 16 inches, 18 inches, 18 3/4 inches, 20 inches and 23 7/8 inches thick.

**LVL beam thickness**

Standard thickness of an LVL beam are ranging from 1-3/4 inches to 7 inches. It is available in 1ply beam of thickness 1-3/4″, 2ply of 3-1/2″ thick, 3ply of 5-1/4″ thick and 4ply of 7″ thick.

Thickness of a one or 1ply LVL beam is 40mm or 1- 3/4″. Width of lvl beam design a beam width based on the fact that the typical width of an LVL beam is 1- 3/4 inches. The width can be increased by laminating in multiples of 1 3/4 inches or 40mm.

Thickness of a 2 ply lvl beam is 3 -1/2 inches or 90mm, which are made of fastening of 2 LVL plies of thickness 1- 3/4″ such that 1-3/4″ + 1- 3/4″ = 3 -1/2″, together on site with super stronger glue. It is generally used for Construction application in commercial and residential structure including beams, truss chords, floor beams, purlins, hip & valley rafter, lintel, studs and header.

Thickness of a 3 ply lvl beam is 5 -1/4 inches or 135mm, which are made of fastening 3 LVL plies of thickness 1- 3/4″ such that 1-3/4″ + 1- 3/4″ + 1-3/4″= 5 -1/4″ together on site with super stronger glue.

Thickness of a 4 ply lvl beam is 180mm or 7 inches wide, which are made of fastening 2 LVL plies of thickness 3- 1/2″ such that 3-1/2″ + 3- 1/2″ = 7″ wide together on site with super stronger glue.

**◆You Can Follow me on Facebook and**

**Subscribe our Youtube Channel**

**LVL beam length**

Length of an LVL beam are 24′, 28′, 32′, 36′, 40′ and 44 feet with special order and customize upto 60 feet long. You can find LVL beams in a 4-foot increments. It can be customised according to your requirement. More than 60 feet there is difficulty in transportation and handling, so LVL can maximum span upto 60 feet in length.

**LVL beam depth**

Depth of an LVL beam are typically range from 5-1/2 inches (140mm) to 23-7/8 inches (606mm) thick. It is available in depth of 5-1/2 inches (140mm) thick, 7-1/4 inches (184mm) thick, 9-1/4 inches (235mm) thick, 9-1/2 inches (241mm) thick, 11-1/4 inches (286mm) thick, 11-7/8 inches (302mm), 14 inches (356mm), 16 inches (406mm), 18 inches (457mm), 18 3/4 inches (476mm), 20 inches (508mm) and 23-7/8 inches (606mm) thick.

**LVL beam calculator**

LVL beam calculator will help you in better understanding and to figure out or estimate of lvl beam sizes, span length and their depth. Design a LVL beam width based on the fact that the typical width of an LVL beam is 1-3/4 inches to 3-1/2 inches. The width can be increased by laminating in multiples of 1-3/4 inches or 40mm. Beam width should be 1/4 to 1/3 beam depth. You can use LVL beam calculator to find required size of lvl beam.

Depth of an LVL beam is calculated with the help of LVL beam calculator based on the rule of thumb for estimating the depth of manufactured beams which is to divide the span length by 20, and beam width should be 1/4 to 1/3 beam depth. An LVL Beam depths are typically 5-1/2 inches, 7-1/4 inches, 9-1/4 inches, 11-1/4 inches, 11-7/8 inches, 14 inches, 16 inches, 18 inches and 20 inches thick.

**◆ How much does a bundle of shingle weigh**

**◆ LVL beam (Laminated veneer lumber): Sizes, Cost, span and price**

** ◆ What size beam do I need for a 14 foot span**

** ◆ What size beam do I need for a 22 foot span**

** ◆ What size beam do I need for a 16 foot span**

** ◆ What size beam do I need for a 18 foot span**

For example, what size an lvl beam do i need for a 20 foot span length, as per general practices and thumb rule, you will need 12″ thick or 3-1/2″× 11-7/8″ size of LVL beam for 20 foot span length. Depth of an LVL beam = (20×12)÷20 = 12 inches deep and width of LVL beam = 12÷ 4 = 3″,which is nearly equal as 3-1/2 inches wide. Thus, you will need something like a 12″ thick or 3-1/2″× 11-7/8″ size of LVL beam to span upto 20 feet.

**LVL beam span**

Maximum span of an LVL beam is up to 60 feet in length due to its strength and is much stronger than traditional lumber. Generally, you can find LVL beams in a 4-foot increments starting at 24 feet and going up to 44 feet long, with special customize size up to 60 feet long. LVL beam thickness is usually between 1-3/4″ (one ply) and 7 inches (4ply).

**How much does lvl beams cost**

On average, LVL beams (Laminated veneer lumber or Engineered wood) are cost/ price around $3 to $12 per linear foot for materials or between $50 to $200 per foot for materials, including installation or total cost of installed would be around $800 to $2,500. National avarage cost of $1650, average range between $800 to $2500, minimum cost of $800, and maximum cost upto $2500.

**How much does it cost to install a LVL beam**

To install an LVL beam for residential construction will cost range between $50 to $200 per linear foot for materials, including installation or total cost of installed would be around $800 and $2,500. National avarage cost of $1650, average range between $800 to $2500, minimum cost of $800, and maximum cost upto $2500.

**How much does a 24 foot LVL beam cost**

On average, cost/ price of a 24 foot LVL beam is around $3 to $12 per linear foot for materials. So, for 24-ft lvl beam price = 24×3 = $72 or 24×12 = $288, thus, price/ cost of 24-ft lVL beam or Laminated veneer lumber or Engineered beam would be $72 to $288 for materials or between $50 to $200 per foot for installation.

**How much does a 30 foot LVL beam cost**

On average, cost/ price of a 30 foot LVL beam is around $3 to $12 per linear foot. So, for 30 ft lvl beam price = 30×3 = $90 or 30×12 = $360, thus, price/ cost of 30 ft lVL beam or Laminated veneer lumber or Engineered beam would be $90 to $360 for materials or between $50 to $200 per foot for installation.

**How much does a 20 foot LVL beam cost**

On average cost/ price of a 20 foot LVL beam is around $3 to $12 per linear foot. So, for 20 ft lvl beam price = 20×3 = $60 or 20×12 = $240, thus, price/ cost of 20 ft lVL beam or Laminated veneer lumber or Engineered beam would be $60 to $240 for materials or between $50 to $200 per foot for installation.

**How much does a 22 foot LVL beam cost**

On average cost/ price of a 22 foot LVL beam is around $3 to $12 per linear foot. So, for 22 ft lvl beam price = 22×3 = $66 or 22×12 = $264, thus, price/ cost of 22 ft lVL beam or Laminated veneer lumber or Engineered beam would be $66 to $264 for materials or between $50 to $200 per foot for installation.

**How much does a 25 foot LVL beam cost**

On average cost/ price of a 25 foot LVL beam is around $3 to $12 per linear foot. So, for 25 ft lvl beam price = 25×3 = $75 or 25×12 = $300, thus, price/ cost of 25 ft lVL beam or Laminated veneer lumber or Engineered beam would be $75 to $300 for materials or between $50 to $200 per foot for installation.

**How much does a 26 foot LVL beam cost**

On average, cost/ price of a 26 foot LVL beam is around $3 to $12 per linear foot. So, for 26 ft lvl beam price = 26×3 = $78 or 26×12 = $312, thus, price/ cost of 26 ft lVL beam or Laminated veneer lumber or Engineered beam would be $78 to $312 for materials or between $50 to $200 per foot for installation.

**How much does a 28 foot LVL beam cost**

On average, cost/ price of a 28 foot LVL beam is around $3 to $12 per linear foot. So, for 28 ft lvl beam price = 28×3 = $84 or 28×12 = $336, thus, price/ cost of 28 ft lVL beam or Laminated veneer lumber or Engineered beam would be $84 to $336 for materials or between $50 to $200 per foot for installation.

**How much does a 18 foot LVL beam cost**

On average cost/ price of a 18 foot LVL beam is around $3 to $12 per linear foot. So, for 18 ft lvl beam price = 18×3 = $54 or 18×12 = $216, thus, price/ cost of 18 ft lVL beam or Laminated veneer lumber or Engineered beam would be $54 to $216 for materials or between $50 to $200 per foot for installation.

**How much does a 16 foot LVL beam cost**

On average, cost/ price of a 16 foot LVL beam is around $3 to $12 per linear foot. So, for 16 ft lvl beam price = 16×3 = $48 or 16×12 = $192, thus, price/ cost of 16 ft lVL beam or Laminated veneer lumber or Engineered beam would be $48 to $192 for materials or between $50 to $200 per foot for installation.

**How much does a 14 foot LVL beam cost**

On average, cost/ price of a 14 foot LVL beam is around $3 to $12 per linear foot. So, for 14 ft lvl beam price = 14×3 = $42 or 14×12 = $168, thus, price/ cost of 14 ft lVL beam or Laminated veneer lumber or Engineered beam would be $42 to $168 for materials or between $50 to $200 per foot for installation.

**How much does a 12 foot LVL beam cost**

On average, cost/ price of a 12 foot LVL beam is around $3 to $12 per linear foot. So, for 12 ft lvl beam price = 12×3 = $36 or 12×12 = $144, thus, price/ cost of 12 ft lVL beam or Laminated veneer lumber or Engineered beam would be $36 to $144 for materials or between $50 to $200 per foot for installation.

**Advantages of LVL Beams**

**The advantages of laminated veneer lumber beams are as follows:**

◆ It has high strength.

◆ It is durable and stronger than solid woods.

◆ It is available at a low cost.

◆ It can be found in the proper dimension.

**Disadvantages of LVL Beams**

**The disadvantages of laminated veneer lumber beams are as follows:**

● It should be properly placed inside the warehouse.

● It is not available in desired shape and size.

● Warping defect can be seen.

● It needs regular maintenance.

**Conclusions:-**

LVL beam is an engineered lumber wood product, 1-3/4 to 3-1/2 inches in sizes, and span upto 60 feet, and which will cost around $3 to $12 per linear foot.